|
Description
HyperAmp® HA2401G
amplifiers
are compatible with 802.11g (b/g)
and 802.11b only wireless LAN
equipment (see chart above for model
compatibility). The 802.11g (b/g)
models support 108 Mbit/sec "Turbo
Mode" radios as well. Hyperlink's
Active Power Control circuit
automatically adjusts the
amplifier's gain to provide a
constant output power regardless of
cable length.
The HyperAmp® HA2401G series
improves range by delivering full
transmit power and receive gain
directly at the antenna where it is
most effective. This gain
compensates for cable losses and
actually increases the receive
sensitivity of most wireless LAN
radios. The unit can be configured
to deliver the full transmit power
with as little as 1 mW of input
power, permitting cable runs of
several hundred feet with no
degradation in operating range.
Streaming Media
Ready
WiFi components
used in a Streaming Video or Audio
system work harder than ones
carrying Data only. They are turned
on for extended periods of time
without the chance to cool off.
Microwave devices are very sensitive
to the heat generated from operating
at high duty cycles. Most amplifiers,
or for that matter many Radios,
cannot pass Streaming Media content
for extended periods of time without
overheating. Some products were
designed for Data only use and have
no method of heatsinking. If you use
them in a Streaming Media system,
those products will self destruct or
have their lifespan diminished. It
would be the equivalent removing the
Heatsink or Fans from your PC.
Hyperlink
Technologies "Streaming Media Ready"
amplifiers (see chart above for
models) were designed from the start
to survive the extreme conditions
that Streaming Media imposes on an
amplifier. Using proprietary
heatsinking techniques, Hyperlink's
Streaming Media amplifiers will
remain at a safe operating
temperatures for the most demanding
Streaming Media applications,
without the need for cumbersome
heatsink plates, fins or fans.
Indoor Models
Designed to be installed indoors or
in weather-resistant enclosures such
as the HyperLink NEMA enclosure, the
"GI" and "GXI" series feature rugged
cast aluminum housings with integral
mounting tabs. The staggered
mounting feet allow multiple
amplifiers to positioned next to
each other with minimal wasted space.
The indoor series amplifiers include
a Power Supply.
Outdoor Models
The "G" and "GX" models feature
rugged, cast aluminum weather-proof
construction to ensure years of
reliable operation in the harshest
environments. The integral mast
mount gives this amplifier superior
strength as well as simplifies
installation. Included with the
outdoor models, the DC Power
Injector provides power to the
HyperAmp® through the antenna cable,
simplifying installation. Current-sensing
circuits provide remote amplifier
diagnostic LEDs. In addition, this
unit provides effective lightning
protection with multi-strike
capability.
DC
Injector
 |
Integral Mast-Mount
 |
Power Supply
The power supply included with the
amplifier is rated at 100-240 VAC @
50/60 Hz allowing it to be used in
the US as well as in the EU when
used with the optional PSX-EU2 Plug
converter (US NEMA 6-15R Flat Blades
to EU 4/4.8 mm round pins). See
Accessories Below for PSX-EU2 Plug
Converter.
Product
Availability
Amplifier products are available for
professionals assembling/installing
certified systems, export, military,
licensed amateur radio (ham radio)
and OEM component sales only and as
part of complete FCC Certified
Systems. Individual amplifier
products are not offered for sale in
the USA.
Note:
This Hyperlink bi-directional
amplifier is designed for burst half-duplex
operation. It is not intended for
constant transmit or CW operation.
Operation of the amplifier in CW
mode will damage the amplifier and
void the warranty.
Connection
Diagrams
Indoor Amplifiers
 |
Outdoor Amplifiers
 |
|
